Instructions for use
They are very suitable for more extensive aesthetic treatments, such as on the thighs, abdomen, hips and buttocks.
The tapes are very easy to use. We apply them quickly on the body. In addition, with one output channel of your muscle stimulator, you work the circumference of your abdomen or legs or your buttocks or arms.
Conductive strips can be used on all muscle stimulators (Cefar-Compex, Sinkopa, Globus, Enraf-Nonius, Medikoel, Sport elect, …)
If your muscle stimulator does not have an output to the clip, you need an attachment to change the output. This will also save you a lot, as all the electrodes per piston are significantly cheaper.
CONNECTIONS and USE: They are made of conductive material and deer skin, which is soaked and squeezed and attached to the hedgehogs. A pair of straps-wet, connect to the output of your electrical muscle stimulator. Place a pair of conductive strips on the body. Only one button is used on each strip, the rest are free.
The yellow part of the strips is in contact with your skin. After the treatment, turn off the electrical stimulator and remove the strips. Carefully remove the cables from the pads.
Air dry the strips (do not place it on heating surfaces). The yellow part of the strips should be facing up when drying.
CLEANING:
Disinfectants (component with ammonia 0.1 to 0.2%) should only be used to clean the product after cleaning with disinfectant use running water and rinse well.
WARNING !!!
Before using the strips for the first time, clean them as described above. DO NOT USE DRY PADS !!
LIFE OF PILLOWS
The lifespan of the tapes depends on the use itself and the way you handle it. Properly covered, it will withstand a great deal of adverse conditions for many years to come. It must not have any damage during the use of the pads, you must pay special attention to the parts where the electrodes are attached, so that only here there is no contact. If you notice any changes on the tapes, stop using it immediately!
STORAGE
Store slippers at a temperature of 0 0C to 50 0C, and relative humidity of 20% to 80%.
WARRANTY NOTICE
The product is manufactured in accordance with regulations 93/42 / EEC and has been manufactured in accordance with the procedures of FIAB Quality System certified ISO 13485.
